How to install your garage door opener. – The different products on the market make it necessary to follow the manufacturer’s instructions for each model of the garage door opener. However, there are a number of things to look for when buying a garage door opener that guarantees quality and reliability.

We buy a garage door opener for safety and convenience. Pressing a button removes the necessity of getting out of the car to open the garage door in wear, snow, rain or darkness. Another push of the button closes and locks the door firmly behind you.

This article is has been created in conjunction with our friends at Easy Garage Door Joondalup 6027

 
But how can we know if the garage door opener we choose will be reliable? Start by buying your garage door from a reputable manufacturer.

Reliability means that it will be of durable construction, designed for safety and built with experience. Look for a chain-driven and solid steel T-rail. Industrial strength is necessary to move something as large and heavy as a garage door. Top-quality components guarantee durability and performance. Other features should include:

Automatic light delay

When the garage door is opened, the lights in the garage light up to safely light your way and turn off automatically after a few minutes. Some manufacturers offer delays for as long as four and a half minutes.

Automatic back security This feature immediately reverses the door if it is obstructed when you go down. It also stops the door if it is obstructed when it goes up.

 
Ventilation / Animal opening

The door should also be able to be stopped at any position to provide ventilation and easy access
for pets.

Illuminated wall control panel

This should include lock / security and light switches for simplicity. With the lock / security feature, you can turn off your garage door opener if you are away for an extended period of time. It also lets you unlock all external radio signals. A light switch on the control panel allows you to use the lamps in the garage without opening the door opener.

Remote control transmitter
Your transmitter should be of the most advanced technology with solid state electronics at all times. The better a L.E.D. light to let you know that the battery is charged and the signal is sent.

Emergency release / Automatic reconnection

 
This enables manual door operation in the event of a power failure. Pressing a button should reconnect the power automatically when the power is restored.

Changed security codes
For added security, choose a model that lets you select and change your personal transmitter code.

 
Regardless of the type of garage door opener you install, special security rules apply. During installation, take the following precautions:

Do not wear rings, watches or loose clothing.
Remove any ropes connected to the garage door before opening the opener.
Disconnect any existing garage door locks to avoid damage to the garage door.
Light garage doors require reinforcement with a 2 x 4 board of at least 6 feet.
Installation and wiring must comply with local building and electrical codes.
Do not use force to compensate for a binding or fixed garage door. This will interfere with the proper functioning of the safety reversal system and possibly damage the garage door. Moving, unloading or adjusting door springs must be performed by a garage door service. Failure to adjust properly can cause serious injury.
Attach the warning label to the wall near the wall control as a reminder of safe operating procedures.
Install all controls out of reach of children.
Adjust the opener properly.